26 May 2011 Design of the data processing system for parallel dual-joint coordinate measuring machine
Author Affiliations +
Proceedings Volume 7997, Fourth International Seminar on Modern Cutting and Measurement Engineering; 799732 (2011) https://doi.org/10.1117/12.887150
Event: Fourth International Seminar on Modern Cutting and Measuring Engineering, 2010, Beijing, China
Abstract
This paper introduces a data processing system for the three-dimensional information of double parallel-joint coordinate measuring machine (PD-CMM).The intelligent sensor units, which consisted of angle sensors, temperature sensors, microcontroller, are set in each joint and arm. The data are mainly the grating's output signal of each joint and the temperature change of each arm. The system samples and processes the data, then communicates with the host computer through USB interface. The simulation and experiments show that the data processing system works well.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tao Wang, Tao Wang, Lian-dong Yu, Lian-dong Yu, } "Design of the data processing system for parallel dual-joint coordinate measuring machine", Proc. SPIE 7997, Fourth International Seminar on Modern Cutting and Measurement Engineering, 799732 (26 May 2011); doi: 10.1117/12.887150; https://doi.org/10.1117/12.887150
PROCEEDINGS
7 PAGES


SHARE
Back to Top