Paper
20 September 1976 Development Of Optical Measurement And Control Systems For Photolithography
Gerald Bachur
Author Affiliations +
Abstract
As the difficulties of producing more complicated integrated circuits increased, the pressures on process designers caused manufacturers of supporting technologies to develop the equipment necessary to generate reproducible product at reasonable yields. A group which proved highly successful in developing higher-performance equipment was in the optical measurement area. In fact, the generation of new measurement systems which were now highly reliable, repeatable, and traceable to NBS gave the device manufacturers a set of "measurement standards" which were rapidly accepted because of proven results. With the results being so positive, impetus was given toward the development of the optically-controlled systems needed to ensure highly-repeatable exposure cycles. A highly-significant advancement in process control, Constant Intensity, was developed. This system uses optical sensors to track the degradation of the source (in respect to specific photosensitive materials) and compensate for the wear by controlling power to the source, main-taining the desired intensity from exposure to exposure. The Constant Intensity capability took what was a variable (intensity and time), replacing them with fixed intensity and time.
© (1976) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gerald Bachur "Development Of Optical Measurement And Control Systems For Photolithography", Proc. SPIE 0080, Developments in Semiconductor Microlithography, (20 September 1976); https://doi.org/10.1117/12.954826
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lamps

Photoresist materials

Semiconductors

Optical lithography

Mercury

Control systems

Sensors

RELATED CONTENT

New Positive Photoresist For Critical Dimension Control
Proceedings of SPIE (July 28 1981)
Experimental Photoresist Sensitometry And Exposure Modeling
Proceedings of SPIE (September 05 1980)
Enabling technologies for nanostructuring
Proceedings of SPIE (June 16 2005)
Photoresist Exposure - Measurement And Control
Proceedings of SPIE (September 20 1976)
A Better Mousetrap
Proceedings of SPIE (July 17 1979)

Back to Top