Translator Disclaimer
26 July 2011 Characterization of palladium thin film deposited by pulsed laser deposition
Author Affiliations +
Proceedings Volume 8001, International Conference on Applications of Optics and Photonics; 80010W (2011) https://doi.org/10.1117/12.890863
Event: International Conference on Applications of Optics and Photonics, 2011, Braga, Portugal
Abstract
In this paper the crystalline and morphological properties of Pd thin films deposited on glass substrate by pulsed laser deposition (PLD) technique at different substrate temperatures have been investigated. These films were deposited with an excimer (XeCl) laser source (λ= 308 nm, pulse duration of 30 ns, repetition rate of 10 Hz).The fabricated films were characterized by various methods such as X-ray diffraction (XRD) and atomic force microscopy (AFM). The thickness and refractive index of samples were measured using ellipsometry. There was influence of substrate temperature on the surface roughness of thin film. The rms roughness increases with increasing temperature. As the temperature increase the crystallinity of the film also increases.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Udaibir Singh, Nisha Jha, and Avinashi Kapoor "Characterization of palladium thin film deposited by pulsed laser deposition", Proc. SPIE 8001, International Conference on Applications of Optics and Photonics, 80010W (26 July 2011); https://doi.org/10.1117/12.890863
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
Back to Top