Translator Disclaimer
2 December 2011 Design of 3D crafts manufacturing system based on stereo vision
Author Affiliations +
Proceedings Volume 8004, MIPPR 2011: Pattern Recognition and Computer Vision; 80041E (2011) https://doi.org/10.1117/12.902915
Event: Seventh International Symposium on Multispectral Image Processing and Pattern Recognition (MIPPR2011), 2011, Guilin, China
Abstract
This paper proposed a design program of 3D crafts manufacturing system which is based on binocular stereo vision and plug-in technology. First, this paper gave an overall introduction to the system, including system structure, function and working flow. Second, this paper analyzed some key technologies in the system development. It proposed a 3D measure method of structured light based binocular stereo system, and introduced the structure of the measurement system and analyzed thoroughly the key technologies in 3D measure, including calibration of stereo system, stereo matching and so on. Besides, it did some researches on how to use Geomagic Studio to carry on point cloud processing and the STL reconstruction. Third, this paper analyzed how to develop the system software which mainly consists of 3D measure Geomagic plug-in and RE Geomagic plug-in using VC++ programming language and plug-in technology. At last, this paper carried on large numbers of experiments and simulation using the developed software and the platform built according to the development program proposed in this paper and received satisfactory results which have proven that the development program proposed in this paper is feasible and the developed software takes on usability and may be used in the development of RE and RP system.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiangyan Liu and Shilin Wu "Design of 3D crafts manufacturing system based on stereo vision", Proc. SPIE 8004, MIPPR 2011: Pattern Recognition and Computer Vision, 80041E (2 December 2011); https://doi.org/10.1117/12.902915
PROCEEDINGS
8 PAGES


SHARE
Advertisement
Advertisement
Back to Top