Translator Disclaimer
25 October 2011 Illuminance-spatial-distribution-based total luminous flux determination for white LEDs
Author Affiliations +
Abstract
Here we report on the application of the well known photo-goniometric method, based on illuminance spatial distribution direct measurements, to determine the total luminous flux for high-intensity white LED sources; thus testing the CENAM primary metrology capabilities recently developed to face the increasing needs claimed by the rapidly moving solid-state lighting industrial sector in Mexico. These first results obtained at CENAM after the gonio-photometric method implementation, allowed us to determine in good accuracy the total luminous flux for a high intensity white LED source, with an estimated uncertainty of 2.86 % (k=1); still lower than the claimed by the tested LED manufacturer. We clearly identified the spectral mismatch correction factor determination and the LED junction temperature measurement and control as the dominant uncertainly sources, and will be addressed in order to improve the accuracy of the measurement system for future experiments.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
N. Vidal, E. Rosas, and Juan B. Hurtado-Ramos "Illuminance-spatial-distribution-based total luminous flux determination for white LEDs", Proc. SPIE 8011, 22nd Congress of the International Commission for Optics: Light for the Development of the World, 80111Z (25 October 2011); https://doi.org/10.1117/12.903375
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
Back to Top