Paper
25 October 2011 Pulsed lasers in photovoltaic technology
A. Barhdadi, B. Hartiti
Author Affiliations +
Abstract
Schottky diodes have been made on both n-type and p-type virgin mono-crystalline silicon processed by three kinds of pulsed lasers currently used in new photovoltaic technologies. The electrical characteristics of these diodes have been measured as a function of laser fluence. A strong change in all of their electrical parameters occurs for fluence equal or higher than a threshold at which the processed silicon surface layer turns into melt. Capacitance versus voltage measurements and DLTS analyses show that laser irradiations introduce a large density of deep levels related to active defects in the processed surface and bulk area. These defects are believed mostly generated during the fast quenching rate in pulsed laser treatments.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Barhdadi and B. Hartiti "Pulsed lasers in photovoltaic technology", Proc. SPIE 8011, 22nd Congress of the International Commission for Optics: Light for the Development of the World, 801120 (25 October 2011); https://doi.org/10.1117/12.903376
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Semiconductor lasers

Diodes

Pulsed laser operation

Nd:YAG lasers

Doping

Excimer lasers

RELATED CONTENT

Gas Immersion Laser Doping
Proceedings of SPIE (August 15 1984)
Appendix: New Commercial Lasers
Proceedings of SPIE (June 03 1988)

Back to Top