13 May 2011 Dynamic performance of a two-axis gimbaled pedestal in keyhole gimbal-lock conditions
Author Affiliations +
Abstract
The common two-axis azimuth-elevation gimbaled pedestal has a full-hemispheric, horizon-to-zenith field of regard. This pedestal has no kinematic difficulties at low elevation angles. In this position, the line-of-sight of the mounted sensor is perpendicular to both the azimuth and elevation gimbal axes, which thus provide two orthogonal degrees of freedom. However, as the line-of-sight approaches zenith, the sensor axis nears alignment with the azimuth axis. The azimuth axis thus loses its ability to move the line-of-sight orthogonally to the sweep of the elevation axis. This condition is known as gimbal lock and the position range in which dynamic difficulties occur is called keyhole. The keyhole region is a solid cone centered around the zenith axis. The onset of dynamics difficulties is a continuum from horizon to zenith, and as such defining the keyhole region is arbitrary. However, dynamic difficulties become rapidly pronounced somewhere between 70 and 80 degrees, so it is generally agreed that the keyhole region starts in this range. This paper provides a comprehensive analysis of the keyhole region. While performance problems at keyhole are well known (high torque, acceleration, and speed requirements), certain dynamic effects actually reduce in keyhole, such that for some systems the range of worst-case performance is actually outside the keyhole region. Gimbal geometry is introduced and pointing equations derived using vector methodology. Kinematic equations are then developed, with a focus on the requirements of line-of-sight stabilization for vehicle-mounted systems. Examples and simulation results are provided to illuminate the issue.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James DeBruin, "Dynamic performance of a two-axis gimbaled pedestal in keyhole gimbal-lock conditions", Proc. SPIE 8052, Acquisition, Tracking, Pointing, and Laser Systems Technologies XXV, 80520J (13 May 2011); doi: 10.1117/12.884438; https://doi.org/10.1117/12.884438
PROCEEDINGS
14 PAGES


SHARE
RELATED CONTENT

Optical line-of-sight steering using gimbaled mirrors
Proceedings of SPIE (June 09 2014)
A unique three-axis gimbal mechanism
Proceedings of SPIE (March 25 2008)
Free-space optical communications system pointer
Proceedings of SPIE (July 03 2003)
Control Technology As Applied To Space Telescope
Proceedings of SPIE (December 21 1981)

Back to Top