29 April 2011 Bionic lightweight design by laser additive manufacturing (LAM) for aircraft industry
Author Affiliations +
Abstract
Today many challenges lie ahead of the aircraft industry. The increasing competition and shortage of resources raise a challenge for future manufacturing technologies and lightweight design. A possibility to cope with these circumstances is the manufacturing technology of Laser Additive Manufacturing (LAM). However there are still challenges to cope with due to the processes novelty, such as the development of further materials, especially lightweight alloys, and new design approaches. Therefore innovative approaches for material development and lightweight design were created in order to fully exploit the processes potentials. The material development process is based on an analytical calculation of temperature distribution versus effective process factors in order to identify acceptable operating conditions for the LAM process. A novel approach to extreme lightweight design was realized by incorporating structural optimization tools and bionic structures into one design process. By consequently following these design principles, designers can achieve lightweight savings in designing new aircraft structure and push lightweight design to new limits.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Claus Emmelmann, Claus Emmelmann, Maren Petersen, Maren Petersen, Jannis Kranz, Jannis Kranz, Eric Wycisk, Eric Wycisk, } "Bionic lightweight design by laser additive manufacturing (LAM) for aircraft industry", Proc. SPIE 8065, SPIE Eco-Photonics 2011: Sustainable Design, Manufacturing, and Engineering Workforce Education for a Green Future, 80650L (29 April 2011); doi: 10.1117/12.898525; https://doi.org/10.1117/12.898525
PROCEEDINGS
12 PAGES


SHARE
Back to Top