Improvement of lateral resolution and reduction of batwings in vertical scanning white-light interferometry

Jan Niehues; Peter Lehmann

doi:10.1117/12.889180

26 May 2011 Improvement of lateral resolution and reduction of batwings in vertical scanning white-light interferometry

Jan Niehues, Peter Lehmann

Proceedings Volume 8082, Optical Measurement Systems for Industrial Inspection VII; 80820W (2011) https://doi.org/10.1117/12.889180
Event: SPIE Optical Metrology, 2011, Munich, Germany

Abstract

The precise and fast acquisition of three-dimensional geometrical data of micro-components is mainly performed by two alternative measuring techniques, either vertical scanning white-light interferometry (SWLI) or confocal microscopy. Both are capable of measuring micro-structured surfaces with a very high precision while recording image sequences during a so-called depth scan. For most applications the axial resolution of these systems is sufficient. Though, in certain applications the lateral resolution of a measurement system is far more critical. In addition, there are several approaches to define the lateral resolution in 3D microscopy. In this paper, we discuss some physical approaches to improve lateral resolution and transfer characteristics in SWLI. As a contribution to the EC-funded project "NanoCMM" we developed a special kind of Linnik white-light interferometer, which provides a lateral resolution well below one micrometer even for working distances of more than 5 mm. The resolution enhancement was achieved by wavelength reduction, i.e. LEDs emitting in the blue and near UV range were used for illumination. We compare the results obtained from a silicon pitch standard based on different illumination sources with a conventional Mirau interferometer providing the same magnification. Finally, in another setup we show that the batwing effect can be successfully reduced by using a confocal aperture in the illumination path of the interferometer. The combination of these different modifications clearly improves SWLI measurement results in comparison with those performed by conventional white-light interferometers.

Citation Download Citation

Jan Niehues and Peter Lehmann "Improvement of lateral resolution and reduction of batwings in vertical scanning white-light interferometry", Proc. SPIE 8082, Optical Measurement Systems for Industrial Inspection VII, 80820W (26 May 2011); https://doi.org/10.1117/12.889180

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available