Paper
26 May 2011 Some aspects of error influences in interferometric measurements of optical surface forms
Author Affiliations +
Abstract
Interferometry is often used to measure the form of optical surfaces. While interferometry is generally expected to give high accuracy results, a variety of error influences exist which have to be considered. Some typical error influences which are often underestimated will be discussed in this paper. In flatness metrology, the main error influences are imperfections of the reference surfaces, specimen support or cavity influences. For non-flat surfaces like aspheres or free form surfaces, in particular the influence of errors from the determination of the lateral coordinates becomes very important. Sub-aperture interferometry copes with stitching errors, which can be reduced by Traceable Multi Sensor subaperture methods where the influence of the imaging system of the interferometer may dominate the error budget. This can be similar for other types of interferometers.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Schulz and A. Wiegmann "Some aspects of error influences in interferometric measurements of optical surface forms", Proc. SPIE 8082, Optical Measurement Systems for Industrial Inspection VII, 80821C (26 May 2011); https://doi.org/10.1117/12.895002
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interferometers

Interferometry

Sensors

Optical testing

Aspheric lenses

Error analysis

Metrology

Back to Top