31 August 2011 Carbon based micro- and nano-opto-mechanical systems (C-MOMS/NOMS)
Author Affiliations +
It is highly likely that future micro and nano-mechanical systems will be powered by light. However, the development of such micro and nano-mechanical systems is still in its infancy. Potential advantages include remote triggering and actuation, remote energy transmission, solar energy scavenging for useful work, and wavelength selectivity of actuation. In recent years, carbon based nano-materials such as carbon nanotubes have shown highly interesting optical to mechanical energy conversion. The development of optical to mechanical energy transducing mechanisms into practical applications is still in its infancy. Only a few devices have been reported till date. This paper presents some of the recent developments in the area of nanotube based photomechanical actuators with emphasis on micro and nanooptomechanical systems. Devices namely micro-cantilevers for detection of free PSA, micro-grippers for manipulation of small particles and micro-mirrors for light modulation have been developed that show both translational and rotational actuation. Finally, integrating nanowires on these platforms could lead to the development of nanooptomechanical systems. The future research of such systems and how they can play an integral part in electronics, sensing and actuation by integrating nanotechnology with mechanics, optics and electronics is discussed.o
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Balaji Panchapakesan, Balaji Panchapakesan, Peng Xu, Peng Xu, James Loomis, James Loomis, } "Carbon based micro- and nano-opto-mechanical systems (C-MOMS/NOMS)", Proc. SPIE 8107, Nano-Opto-Mechanical Systems (NOMS), 810708 (31 August 2011); doi: 10.1117/12.893794; https://doi.org/10.1117/12.893794


Reshaping technique for MOEM system fabrication
Proceedings of SPIE (September 01 1998)
Scanning micromirrors: an overview
Proceedings of SPIE (October 24 2004)
A curled-hinge comb micro-mirror using CMOS-MEMS process
Proceedings of SPIE (January 22 2006)

Back to Top