Design, assembly, and testing of a photon Doppler velocimetry probe

Robert M. Malone; Matthew E. Briggs; Brian M. Cata; Brian C. Cox; Edward P. Daykin; Douglas O. DeVore; David L. Esquibel; Daniel K. Frayer; Brent C. Frogget; Michael R. Furlanetto; Cenobio H. Gallegos; David B. Holtkamp; Morris I. Kaufman; Kevin D. McGillivray; Peter Pazuchanics; Lori E. Primas; Vincent T. Romero; Michael A. Shinas; Danny S. Sorenson

doi:10.1117/12.894461

12 September 2011 Design, assembly, and testing of a photon Doppler velocimetry probe

Robert M. Malone, Matthew E. Briggs, Brian M. Cata, Brian C. Cox, Edward P. Daykin, Douglas O. DeVore, David L. Esquibel, Daniel K. Frayer, Brent C. Frogget, Michael R. Furlanetto, Cenobio H. Gallegos, David B. Holtkamp, Morris I. Kaufman, Kevin D. McGillivray, Peter Pazuchanics, Lori E. Primas, Vincent T. Romero, Michael A. Shinas, Danny S. Sorenson

Author Affiliations +

Proceedings Volume 8131, Optical System Alignment, Tolerancing, and Verification V; 813109 (2011) https://doi.org/10.1117/12.894461
Event: SPIE Optical Engineering + Applications, 2011, San Diego, California, United States

Abstract

A novel fiber-optic probe measures the velocity distribution of an imploding surface along many lines of sight. Reflected light from each spot on the moving surface is Doppler shifted with a small portion of this light propagating backwards through the launching fiber. The reflected light is mixed with a reference laser in a technique called photon Doppler velocimetry, providing continuous time records. Within the probe, a matrix array of 56 single-mode fibers sends light through an optical relay consisting of three types of lenses. Seven sets of these relay lenses are grouped into a close-packed array allowing the interrogation of seven regions of interest. A six-faceted prism with a hole drilled into its center directs the light beams to the different regions. Several types of relay lens systems have been evaluated, including doublets and molded aspheric singlets. The optical design minimizes beam diameters and also provides excellent imaging capabilities. One of the fiber matrix arrays can be replaced by an imaging coherent bundle. This close-packed array of seven relay systems provides up to 476 beam trajectories. The pyramid prism has its six facets polished at two different angles that will vary the density of surface point coverage. Fibers in the matrix arrays are angle polished at 8°to minimize back reflections. This causes the minimum beam waist to vary along different trajectories. Precision metrology on the direction cosine trajectories is measured to satisfy environmental requirements for vibration and temperature.

Citation Download Citation

Robert M. Malone, Matthew E. Briggs, Brian M. Cata, Brian C. Cox, Edward P. Daykin, Douglas O. DeVore, David L. Esquibel, Daniel K. Frayer, Brent C. Frogget, Michael R. Furlanetto, Cenobio H. Gallegos, David B. Holtkamp, Morris I. Kaufman, Kevin D. McGillivray, Peter Pazuchanics, Lori E. Primas, Vincent T. Romero, Michael A. Shinas, and Danny S. Sorenson "Design, assembly, and testing of a photon Doppler velocimetry probe", Proc. SPIE 8131, Optical System Alignment, Tolerancing, and Verification V, 813109 (12 September 2011); https://doi.org/10.1117/12.894461

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE