Converting a 3D surface into a set of directional scatterers for high-resolution radar response simulation

Henna Perälä; Minna Väilä; Juha Jylhä; Ilkka Venäläinen; Ari Visa

doi:10.1117/12.893485

22 September 2011 Converting a 3D surface into a set of directional scatterers for high-resolution radar response simulation

Henna Perälä, Minna Väilä, Juha Jylhä, Ilkka Venäläinen, Ari Visa

Author Affiliations +

Proceedings Volume 8134, Optics and Photonics for Information Processing V; 81340H (2011) https://doi.org/10.1117/12.893485
Event: SPIE Optical Engineering + Applications, 2011, San Diego, California, United States

Abstract

It is practical and efficient to simplify targets to point scatterers in radar simulations. With low-resolution radars, the radar cross section (RCS) is a sufficient feature to characterize the scattering properties of a target. However, the RCS totals the target scattering properties to a scalar value for each aspect angle. Thus, a more detailed representation of the target is required with high-resolution radar techniques, such as Inverse Synthetic-Aperture Radar (ISAR). In straightforward simulation scenarios, high-resolution targets have been modeled placing identical point scatterers in the shape of the target, or with a few dominant point scatterers. As extremely simple arrangements, these do not take the self-shadowing into account and are not realistic enough for high demands. Our radar response simulation studies required a target characterization akin to RCS, which would also function in highresolution cases and take the self-shadowing and multiple reflections into account. Thus, we propose an approach to converting a 3-dimensional (3D) surface into a set of scatterers with locations, orientations, and directional scattering properties. The method is intended for far field operation, but could be adjusted for use in the near field. It is based on ray tracing which provides the self-shadowing and reflections naturally. In this paper, we present ISAR simulation results employing the proposed method. The constructed scatterer set is scalable for different wavelengths enabling the fast production of realistic simulations including authentic RCS scattering center formation. This paper contributes to enhancing the reality of the simulations, yet keeping them manageable and computationally reasonable.

Citation Download Citation

Henna Perälä, Minna Väilä, Juha Jylhä, Ilkka Venäläinen, and Ari Visa "Converting a 3D surface into a set of directional scatterers for high-resolution radar response simulation", Proc. SPIE 8134, Optics and Photonics for Information Processing V, 81340H (22 September 2011); https://doi.org/10.1117/12.893485

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available