Paper
27 September 2011 Lithium and boron based semiconductors for thermal neutron counting
Author Affiliations +
Abstract
Thermal neutron detectors in planar configuration were fabricated from LiInSe2 and B2Se3 crystals grown at RMD Inc. All fabricated semiconductor devices were characterized for the current-voltage (I-V) characteristic and neutron counting measurement. Pulse height spectra were collected from 241AmBe (neutron source on all samples), as well as 137Cs and 60Co gamma ray sources. In this study, the resistivity of all crystals is reported and the collected pulse height spectra are presented for fabricated devices. Note that, the 241AmBe neutron source was custom designed with polyethylene around the source as the neutron moderator, mainly to thermalize the fast neutrons before reaching the detectors. Both LiInSe2 and B2Se3 devices showed response to thermal neutrons of the 241AmBe source.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alireza Kargar, Joshua Tower, Huicong Hong, Leonard Cirignano, William Higgins, and Kanai Shah "Lithium and boron based semiconductors for thermal neutron counting", Proc. SPIE 8142, Hard X-Ray, Gamma-Ray, and Neutron Detector Physics XIII, 81421P (27 September 2011); https://doi.org/10.1117/12.899363
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Gamma radiation

Boron

Crystals

Semiconductors

Absorption

Lithium

RELATED CONTENT

Thermal neutron detection with lithium-based semiconductors
Proceedings of SPIE (October 04 2022)
Semiconductor neutron detectors
Proceedings of SPIE (September 30 2016)
Electronic structure and absorption spectra of PbI2
Proceedings of SPIE (November 18 1999)
Diamond For Optical Material
Proceedings of SPIE (December 26 1984)

Back to Top