Experimental validation of opto-thermo-elastic modeling in OOFELIE multiphysics

Alexandra Mazzoli; Philippe Saint-Georges; Anne Orban; Jean-Sébastien Ruess; Jérôme Loicq; Christian Barbier; Yvan Stockman; Marc Georges; Philippe Nachtergaele; Stéphane Paquay; Pascal De Vincenzo

doi:10.1117/12.896515

22 September 2011 Experimental validation of opto-thermo-elastic modeling in OOFELIE multiphysics

Alexandra Mazzoli, Philippe Saint-Georges, Anne Orban, Jean-Sébastien Ruess, Jérôme Loicq, Christian Barbier, Yvan Stockman, Marc Georges, Philippe Nachtergaele, Stéphane Paquay, Pascal De Vincenzo

Author Affiliations +

Proceedings Volume 8167, Optical Design and Engineering IV; 81671I (2011) https://doi.org/10.1117/12.896515
Event: SPIE Optical Systems Design, 2011, Marseille, France

Abstract

The objective of this work is to demonstrate the correlation between a simple laboratory test bench case and the predictions of the OOFELIE Multiphysics software in order to deduce modeling guidelines and improvements. For that purpose two optical systems have been analyzed. The first one is a spherical lens fixed in an aluminium barrel, which is the simplest structure found in an opto-mechanical system. In this study, material characteristics are assumed to be well known: BK7 and aluminium have been retained. Temperature variations between 0 and +60°C from ambient have been applied to the samples. The second system is a YAG laser bar heated by means of a dedicated oven. For the two test benches thermo-elastic distortions have been measured using a Fizeau interferometer. This sensor measures wavefront error in the range of 20 nm to 1 μm without physical contact with the opto-mechanical system. For the YAG bar, birefringence and polarization measurements have also been performed using a polarimetric bench. The tests results have been compared to the predictions obtained by OOFELIE Multiphysics which is a simulation software dedicated to multiphysics coupled problems involving optics, mechanics, thermal physics, electricity, electromagnetism, acoustics and hydrodynamics. From this comparison modeling guidelines have been issued with the aim of improving the accuracy of computed thermo-elastic distortions and their impact on the optical performances.

Citation Download Citation

Alexandra Mazzoli, Philippe Saint-Georges, Anne Orban, Jean-Sébastien Ruess, Jérôme Loicq, Christian Barbier, Yvan Stockman, Marc Georges, Philippe Nachtergaele, Stéphane Paquay, and Pascal De Vincenzo "Experimental validation of opto-thermo-elastic modeling in OOFELIE multiphysics", Proc. SPIE 8167, Optical Design and Engineering IV, 81671I (22 September 2011); https://doi.org/10.1117/12.896515

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE