30 September 2011 Extremely aspheric surfaces: toward a manufacturing process based on active optics
Author Affiliations +
Abstract
The evolution of astrophysical needs in the era of extremely large telescopes calls more and more complex instrumental systems and sub-systems. A promising solution would be to propose compact reflective optical systems, with less optical surfaces than classical optical designs. This is made possible if the designs are not limited by the use of known conics or symmetrical optical surfaces. Recent studies have shown that the use of highly aspherics could strongly reduce the number of optical surfaces and also the size of instruments, while improving the global system performances. The aim of this article is to study the feasibility of the design and manufacturing of highly aspheric optical mirrors, toward freeform mirrors, thanks to the combination of different active optics techniques: stress deformations up to plasticization phenomenon to provide the optical shape during the manufacturing and actuator corrections to compensate for residual errors during the operation phase of the instrument. A first step consists in structural mechanics analysis to understand as possible the non-linear behaviors of materials and its particular effects which depend on the material chosen, the global dimensions and the boundary conditions parameterized for the manufacturing process.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zalpha Challita, Zalpha Challita, Emmanuel Hugot, Emmanuel Hugot, Marc Ferrari, Marc Ferrari, David Le Mignant, David Le Mignant, Sébastien Vivès, Sébastien Vivès, Jean-Gabriel Cuby, Jean-Gabriel Cuby, } "Extremely aspheric surfaces: toward a manufacturing process based on active optics", Proc. SPIE 8169, Optical Fabrication, Testing, and Metrology IV, 816912 (30 September 2011); doi: 10.1117/12.896578; https://doi.org/10.1117/12.896578
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

FAME: Freeform Active Mirrors Experiment
Proceedings of SPIE (July 27 2014)
Long-term stable active mount for reflective optics
Proceedings of SPIE (July 21 2016)
Designing of supports for a 1.2m active thin mirror
Proceedings of SPIE (October 14 2012)
Active support of ultra thin mirror
Proceedings of SPIE (May 29 2006)
Optimization of the ATST primary mirror support system
Proceedings of SPIE (July 05 2006)

Back to Top