Retrieval of spectral response functions for the hyperspectral sensor of HISUI (Hyperspectral Imager SUIte) by means of onboard calibration sources

Kenji Tatsumi; Nagamitsu Ohgi; Hisashi Harada; Toneo Kawanishi; Fumihiro Sakuma; Hitomi Inada; Takahiro Kawashima; Akira Iwasaki

doi:10.1117/12.897218

3 October 2011 Retrieval of spectral response functions for the hyperspectral sensor of HISUI (Hyperspectral Imager SUIte) by means of onboard calibration sources

Kenji Tatsumi, Nagamitsu Ohgi, Hisashi Harada, Toneo Kawanishi, Fumihiro Sakuma, Hitomi Inada, Takahiro Kawashima, Akira Iwasaki

Author Affiliations +

Proceedings Volume 8176, Sensors, Systems, and Next-Generation Satellites XV; 81760S (2011) https://doi.org/10.1117/12.897218
Event: SPIE Remote Sensing, 2011, Prague, Czech Republic

Abstract

HISUI (Hyper-spectral Imager SUIte), which is the next Japanese earth observation project, has been developed under the contract with Ministry of Economy, Trade and Industry(METI) and New Energy and Industrial Technology Development Organization(NEDO). HISUI is composed of hyper-spectral sensor and multi-spectral sensor. The hyperspectral sensor is an imaging spectrometer with two separate spectral channels: one for the VNIR range from 400 to 970 nm and the other for the SWIR range from 900 to 2500 nm. Ground sampling distance is 30 m with spatial swath width of 30 km. The spectral sampling will be better than 10 nm in the VNIR and 12.5 nm in the SWIR. The multi-spectral sensor has four VNIR spectral bands with spatial resolution of 5m and swath width of 90 km. HISUI will be installed in ALOS-3 that is an earth observing satellite in the project formation phase by JAXA in FY 2015. This paper is concerned with the retrieval of spectral response functions (SRF) for the hyper-spectral sensor. The center wavelength and bandwidth of spectral response functions of hyper-spectral sensor may shift and broaden due to the distortion in the spectrometer, the optics and the detector assembly. Therefore it is necessary to measure or estimate the deviation of the wavelength and the bandwidth broadening of the SRFs. In this paper, we describe the methods of retrieval of the SRF's parameters (Gaussian functions assumed) by means of onboard calibration sources and we show some simulation's results and the usefulness of this method.

Citation Download Citation

Kenji Tatsumi, Nagamitsu Ohgi, Hisashi Harada, Toneo Kawanishi, Fumihiro Sakuma, Hitomi Inada, Takahiro Kawashima, and Akira Iwasaki "Retrieval of spectral response functions for the hyperspectral sensor of HISUI (Hyperspectral Imager SUIte) by means of onboard calibration sources", Proc. SPIE 8176, Sensors, Systems, and Next-Generation Satellites XV, 81760S (3 October 2011); https://doi.org/10.1117/12.897218

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available