The application of pulsed thermography in the inspection of wind turbine blades

Ning Tao; Zhi Zeng; Lichun Feng; Xiaoli Li; Yeshu Li; Cunlin Zhang

doi:10.1117/12.899646

8 September 2011 The application of pulsed thermography in the inspection of wind turbine blades

Ning Tao, Zhi Zeng, Lichun Feng, Xiaoli Li, Yeshu Li, Cunlin Zhang

Proceedings Volume 8193, International Symposium on Photoelectronic Detection and Imaging 2011: Advances in Infrared Imaging and Applications; 819319 (2011) https://doi.org/10.1117/12.899646
Event: International Symposium on Photoelectronic Detection and Imaging 2011, 2011, Beijing, China

Abstract

Wind power is a very promising source of environmentally safe, renewable, and the fast-growing energy source over the past several years. The blades of a wind turbine are considered to be an important component in wind turbine generator. Currently, bigger and more powerful wind blades are being built to increase the swept area of the turbine and extract more energy from the wind. Correspondingly, more capital cost is invested in manufacture and service. In order to reduce damage possibility and extend the wind turbine blades life, there are increasing demands for the inspection of wind turbine blades in the manufacturing factory and on site inspection. The regular inspections of wind turbine blades are done normally by using visual inspection and tapping test. To improve the safety of wind turbine blades, nondestructive testing technique using pulsed thermography is being investigated in this study. This technique utilized an active pulsed heating source that is applied on the outer surface of wind turbine blades, and an infrared camera to monitor the surface temperature distribution controlled by a computer. Reflective pulsed thermography was directly applied on several full scale wind blades, surface and subsurface defects, such as air bubbles, pin holes, edge bonding, etc. were clearly detected. Several specimens were intentionally manufactured to simulate the glue faults between supporting spars and glass fiber reinforced plastic (GFRP) shells with different thickness. Afterwards they were inspected by using pulsed thermography in laboratory. The current test results indicated that pulsed thermography has the potential for the detection of glue faults at least about 15mm thickness GFRP shell. It is shown that pulsed thermography maybe provide a powerful non-contacting technique for the inspection of wind turbine blades as well in the workshop just after the production or in the field that before and after installation of the wind blades and during reparation.

Citation Download Citation

Ning Tao, Zhi Zeng, Lichun Feng, Xiaoli Li, Yeshu Li, and Cunlin Zhang "The application of pulsed thermography in the inspection of wind turbine blades", Proc. SPIE 8193, International Symposium on Photoelectronic Detection and Imaging 2011: Advances in Infrared Imaging and Applications, 819319 (8 September 2011); https://doi.org/10.1117/12.899646

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available