Translator Disclaimer
8 September 2011 Response characteristic of InSb IRFPA under high reverse bias condition
Author Affiliations +
Abstract
Infrared Focal Plane Array (IRFPA) of InSb is designed to work under the condition of zero bias voltage or nearly to zero bias voltage. InSb IRFPA can't work normally if PN junction is in the condition of high reverse bias voltage for several minutes. In order to analyze the causation of the phenomena some experiments were designed to simulate the condition of high reverse bias voltage. It is found that when the reverse bias voltage exceeds the limited value, the responsibility of InSb detector becomes lower. The phenomena will not change unless the operating temperature is raised to room temperature and kept for a long time. Response characteristic of InSb PN junction under high reverse bias voltage is briefly described in this paper. The factors affecting response characteristic are discussed. The limited value of the reverse voltage is given. The result is useful to design the driving circuit of InSb IPFPA. It also plays the guidance part in application of InSb detector.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jun-ming Liu, Qiang Guo, Wei Wang, and Zhen-yu Peng "Response characteristic of InSb IRFPA under high reverse bias condition", Proc. SPIE 8193, International Symposium on Photoelectronic Detection and Imaging 2011: Advances in Infrared Imaging and Applications, 81932C (8 September 2011); https://doi.org/10.1117/12.900335
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

InAsSb detector and FPA data and analysis
Proceedings of SPIE (May 20 2014)
1/f noise QWIPs, superlattice, and nBn detectors
Proceedings of SPIE (September 13 2016)
Nonuniformity analyses of IRFPA with DI readout circuit
Proceedings of SPIE (August 05 2009)
Wide band (2.5 10.5 µm), high frame rate...
Proceedings of SPIE (May 03 2010)

Back to Top