5 December 2011 An off-axis optical system design applied in the precision measurement of axle hole's inner diameter
Author Affiliations +
Proceedings Volume 8197, 2011 International Conference on Optical Instruments and Technology: Optical Systems and Modern Optoelectronic Instruments; 819705 (2011) https://doi.org/10.1117/12.907344
Event: International Conference on Optical Instruments and Technology (OIT2011), 2011, Beijing, Beijing, China
Abstract
Optical non-contact measurement has many advantages, which has been widely used in the precise size measurement. Since the precision axle hole's inner diameter is small, the measuring axis optical system cannot be placed into the axle hole. As a result, the optical non-contact measurement is difficult to be applied in the occasion above. In this paper, a set of optical system based on off-axis imaging principle that applied to small axle hole's inner diameter measurement is designed. According to the Scheimpflug principle, the relationship of object plane tilt and image plane tilt is derived in this paper. To meet the requirement of measurement accuracy, an off-axis imaging system with a suitable magnification is presented. The off-axis imaging optical system cooperating with the fiber collimator and the PSD can attain 2μm measurement accuracy.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hongbo Xie, Hongbo Xie, Fulin Li, Fulin Li, Tao Li, Tao Li, Tong Yang, Tong Yang, } "An off-axis optical system design applied in the precision measurement of axle hole's inner diameter", Proc. SPIE 8197, 2011 International Conference on Optical Instruments and Technology: Optical Systems and Modern Optoelectronic Instruments, 819705 (5 December 2011); doi: 10.1117/12.907344; https://doi.org/10.1117/12.907344
PROCEEDINGS
5 PAGES


SHARE
RELATED CONTENT


Back to Top