5 December 2011 Research of zernike fitting algorithm in finite element process
Proceedings Volume 8197, 2011 International Conference on Optical Instruments and Technology: Optical Systems and Modern Optoelectronic Instruments; 81971K (2011) https://doi.org/10.1117/12.917046
Event: International Conference on Optical Instruments and Technology (OIT2011), 2011, Beijing, Beijing, China
Abstract
Zernike polynomials are usually used to describe the wave-front of an optical system, but it is also used to stand for the surface of an optical system. Researching the algorithm in this paper is according to this property. When temperature of a lens increases from -60°C to 60°C, the surface of the lens will change simultaneously, which will influence the image quality and the sensitivity of the detector. In this paper this progress will be simulated by finite element software, abaqus. After that the data of the lens whose surfaces have deformed will be exported. Zernike polynomials are used to describe the changed surface, and zernike coefficients are calculated with matlab by using the method of least squares. All of the the zernike coefficients are imported to an optical design software, zemax, and then the aberrations coefficients can be got from the software. Finally, the solution of avoiding these problems caused by temperature changing can be obtained.
Xi-Fa Song, Xi-Fa Song, Lin Li, Lin Li, Yi-Fan Huang, Yi-Fan Huang, Si-Yu Lu, Si-Yu Lu, } "Research of zernike fitting algorithm in finite element process", Proc. SPIE 8197, 2011 International Conference on Optical Instruments and Technology: Optical Systems and Modern Optoelectronic Instruments, 81971K (5 December 2011); doi: 10.1117/12.917046; https://doi.org/10.1117/12.917046
PROCEEDINGS
7 PAGES

SHARE
KEYWORDS
##### Show All Keywords
RELATED CONTENT

Computing the ULLV decomposition
Proceedings of SPIE (October 28 1994)
Orthogonality of Zernike polynomials
Proceedings of SPIE (September 09 2002)