29 November 2011 Simulation research on diamond cutting of mold steel using SPH method
Author Affiliations +
The theory and application of SPH (Smoothed Particle Hydrodynamics) is presented. A Langrangian SPH model is conducted using the LS-DYNA software. As a recently developed and promising method, particles are used in SPH as a substitute for mesh and large material deformation is easily handled. Material separation is well achieved through defining nodes to surface contact. The cutting process of 4340 steel is simulated with SPH method. The process of chip formation is depicted well through the natural flow of SPH particles. The stress distribution and changes of cutting force displays the constitutive behavior of material during cutting. And the maximum value of Von Mises stress, shear stress and plastic strain are concentrated at primary deformation zone, especially near the tool tip.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaoguang Guo, Xiaoguang Guo, Yanjun Wei, Yanjun Wei, Zhuji Jin, Zhuji Jin, Dongming Guo, Dongming Guo, } "Simulation research on diamond cutting of mold steel using SPH method", Proc. SPIE 8202, 2011 International Conference on Optical Instruments and Technology: Solid State Lighting and Display Technologies, Holography, Speckle Pattern Interferometry, and Micro/Nano Manufacturing and Metrology, 82020O (29 November 2011); doi: 10.1117/12.916665; https://doi.org/10.1117/12.916665

Back to Top