Paper
9 February 2012 A cost-effective analog method to produce time-gated luminescence images
Author Affiliations +
Abstract
Time-gated luminescence images were obtained by analog summation of a series of sequential images that were obtained with a cooled modified interline CCD camera, and a fluorescence microscope modified to use a UV LED for illumination. The interline CCD camera obtains an analog sum of a multi-frame image by not reading out the storage line after each frame is acquired; instead, the charges from the acquisition pixels are transferred to the storage pixels, which adds them to those previously stored; subsequently, the sum of the images is readout from the storage pixels and digitized. The length of the exposure is limited by the capacity of the storage pixels and the rate of generation of background (noise). Previously, the quality of the images obtained with the room temperature camera was degraded by the buildup of thermal noise. The interline transfer, electronically shuttered, cooled astronomy CCD camera, which was modified for analog summation rapidly produced low noise images; yet permitted long exposures. The past problems with lanthanide dyes of low extinction coefficients and equipment cost have now been solved.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert C. Leif, Sean Yang, Yiqing Lu, Dayong Jin, and Stephen Chambers "A cost-effective analog method to produce time-gated luminescence images", Proc. SPIE 8225, Imaging, Manipulation, and Analysis of Biomolecules, Cells, and Tissues X, 82250Z (9 February 2012); https://doi.org/10.1117/12.911853
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Analog electronics

Luminescence

Cameras

Lanthanides

CCD cameras

Camera shutters

Ultraviolet radiation

Back to Top