Machining of glass and quartz using nanosecond and picosecond laser pulses

David Ashkenasi; Tristan Kaszemeikat; Norbert Mueller; Andreas Lemke; Hans Joachim Eichler

doi:10.1117/12.907740

15 February 2012 Machining of glass and quartz using nanosecond and picosecond laser pulses

David Ashkenasi, Tristan Kaszemeikat, Norbert Mueller, Andreas Lemke, Hans Joachim Eichler

Author Affiliations +

Proceedings Volume 8243, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVII; 82430M (2012) https://doi.org/10.1117/12.907740
Event: SPIE LASE, 2012, San Francisco, California, United States

Abstract

New laser processing strategies in micro processing of glass, quartz and other optically transparent materials are being developed with increasing effort. Utilizing diode-pumped solid-state laser generating nanosecond pulsed green (532 nm) laser light in conjunction with either scanners or special trepanning systems can provide for reliable glass machining at excellent efficiency. Micro ablation can be induced either from the front or rear side of the glass sample. Ablation rates of over 100 μm per pulse can be achieved in rear side processing. In comparison, picosecond laser processing of glass and quartz (at a wavelength of 1064 or 532 nm) yield smaller feed rates at however much better surface and bore wall quality. This is of great importance for small sized features, e.g. through-hole diameters smaller 50 μm in thin glass. Critical for applications with minimum micro cracks and maximum performance is an appropriate distribution of laser pulses over the work piece along with optimum laser parameters. Laser machining tasks are long aspect micro drilling, slanted through holes, internal contour cuts, micro pockets and more complex geometries in e.g. soda-lime glass, B33, B270, D236T, AF45 and BK7 glass, quartz, and Zerodur.

Citation Download Citation

David Ashkenasi, Tristan Kaszemeikat, Norbert Mueller, Andreas Lemke, and Hans Joachim Eichler "Machining of glass and quartz using nanosecond and picosecond laser pulses", Proc. SPIE 8243, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVII, 82430M (15 February 2012); https://doi.org/10.1117/12.907740

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE