6 February 2012 Study on GaN epilayer transferring to Cu substrate from sapphire substrate using Ga2O3 sacrificial layer
Author Affiliations +
Abstract
GaN epilayer can be grown on sapphire substrate with a Ga2O3 sacrificial layer. It was employed for the epilayer transferring from sapphire substrate to Cu substrate using the chemical lift-off process application. The (-201) oriented β-Ga2O3 thin film was first deposited on the c-plane sapphire substrate, followed by the GaN growth via metalorganic vapor phase epitaxy under N2 and H2 environment in sequence. The crystal quality of GaN epilayer can be improved dramatically with the regrowth in a H2 ambient. A GaN epilayer with an electroplated copper substrate was demonstrated using a chemical lift-off process where the Ga2O3 sacrificial layer can be laterally etched out with a hydrofluoric solution. It is worthy to mention that the separated sapphire substrate can be cleaned and reused for LED epitaxial growth next time. It is benefiting the cost down for the LED fabrication and Green Photonics Development.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. H. Horng, R. H. Horng, D. S. Wuu, D. S. Wuu, S. L. Ou, S. L. Ou, H. H. Hsueh, H. H. Hsueh, } "Study on GaN epilayer transferring to Cu substrate from sapphire substrate using Ga2O3 sacrificial layer", Proc. SPIE 8278, Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XVI, 82780Y (6 February 2012); doi: 10.1117/12.907177; https://doi.org/10.1117/12.907177
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT


Back to Top