Paper
24 October 2011 Analysis of ground calibration of ranging errors for a single aerial lidar instrument
Dongyang Ma, Licheng Wang
Author Affiliations +
Proceedings Volume 8286, International Symposium on Lidar and Radar Mapping 2011: Technologies and Applications; 828609 (2011) https://doi.org/10.1117/12.912749
Event: International Symposium on Lidar and Radar Mapping Technologies, 2011, Nanjing, China
Abstract
In this paper, the ranging procedure and working principle of LiDAR were introduced. By analyzing the principle, it is found that related methods can cause time delay error and ranging error for different ground targets. Then, elements affecting LiDAR ranging precision were analyzed, and experimental results proved that un-calibrated ranging error can reach one meter for the targets one hundred meters away, which cannot satisfy the requirements of practical applications. Thus, ground calibration techniques of airborne LiDAR were analyzed, and the elements affecting LiDAR ranging precision are classified into three classes. Correspondingly, an equation was proposed to express the influences of ranging errors, a ground calibration scheme was designed for single LiDAR, and a solution method to the parameters was given. Experiments were done on a China-made LiDAR system, and experimental parameters proved that gray level had some influence on ranging values, with the range difference of different gray boards reaching centimeter level. Meanwhile, LiDARs with different parameter settings can also affect ranging values. However, due to the imprecise experiment process, the additive constant and scale constant were not obvious in the experiments, and the experiment needs improving in the future.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dongyang Ma and Licheng Wang "Analysis of ground calibration of ranging errors for a single aerial lidar instrument", Proc. SPIE 8286, International Symposium on Lidar and Radar Mapping 2011: Technologies and Applications, 828609 (24 October 2011); https://doi.org/10.1117/12.912749
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ranging

LIDAR

Calibration

Distance measurement

Error analysis

Pulsed laser operation

3D metrology

Back to Top