Translator Disclaimer
14 October 2011 Automatic re-calibration by laser metrology and computer algorithms
Author Affiliations +
Proceedings Volume 8287, Eighth Symposium Optics in Industry; 828710 (2011)
Event: Eighth Symposium Optics in Industry, 2011, Toluca de Lerdo, Mexico
An automatic re-calibration for mobile vision is presented. In this technique, the vision parameters are determined by means of a Bezier network. This procedure is carried out by image processing of a laser line. From the network structure, the initial calibration and the online re-calibration are performed. The proposed technique avoids calibrated references and physical measurements, which are used in traditional calibration. Thus, the proposed re-calibration improves the accuracy and performance of the mobile vision. This procedure represents a contribution in the re-calibration. To elucidate this contribution, an evaluation is performed based on the re-calibration methods. Also, the time processing is described.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. A. Muñoz Rodríguez and Edgar Fernando Velazquez Pedroza "Automatic re-calibration by laser metrology and computer algorithms ", Proc. SPIE 8287, Eighth Symposium Optics in Industry, 828710 (14 October 2011);


CCD camera calibration using the finite element method
Proceedings of SPIE (September 13 1995)
3D vision for nuclear reactor retrofit tool docking
Proceedings of SPIE (January 28 2010)
Target detect system in 3D using vision apply on plant...
Proceedings of SPIE (March 21 2001)
2D vision in a 3D system
Proceedings of SPIE (October 05 2001)
A method of camera calibration based on image processing
Proceedings of SPIE (March 05 2008)

Back to Top