Translator Disclaimer
Paper
7 February 2012 Full optical characterization of autostereoscopic 3D displays using local viewing angle and imaging measurements
Author Affiliations +
Proceedings Volume 8288, Stereoscopic Displays and Applications XXIII; 82880S (2012) https://doi.org/10.1117/12.905971
Event: IS&T/SPIE Electronic Imaging, 2012, Burlingame, California, United States
Abstract
Two commercial auto-stereoscopic 3D displays are characterized a using Fourier optics viewing angle system and an imaging video-luminance-meter. One display has a fixed emissive configuration and the other adapts its emission to the observer position using head tracking. For a fixed emissive condition, three viewing angle measurements are performed at three positions (center, right and left). Qualified monocular and binocular viewing spaces in front of the display are deduced as well as the best working distance. The imaging system is then positioned at this working distance and crosstalk homogeneity on the entire surface of the display is measured. We show that the crosstalk is generally not optimized on all the surface of the display. Display aspect simulation using viewing angle measurements allows understanding better the origin of those crosstalk variations. Local imperfections like scratches and marks generally increase drastically the crosstalk, demonstrating that cleanliness requirements for this type of display are quite critical.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pierre Boher, Thierry Leroux, Thibault Bignon, and Véronique Collomb-Patton "Full optical characterization of autostereoscopic 3D displays using local viewing angle and imaging measurements", Proc. SPIE 8288, Stereoscopic Displays and Applications XXIII, 82880S (7 February 2012); https://doi.org/10.1117/12.905971
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
Back to Top