15 November 2011 Measurement and research on the appearance of tongue board based on modification to discuss centrifugal fan air performance
Author Affiliations +
Proceedings Volume 8321, Seventh International Symposium on Precision Engineering Measurements and Instrumentation; 83213L (2011) https://doi.org/10.1117/12.905338
Event: Seventh International Symposium on Precision Engineering Measurements and Instrumentation, 2011, Yunnan, China
Abstract
This paper presents a reduced fan noise method, with increased fan-benefit analysis of various performances. The experimental approach adopts changes in the outlet in the form of two fans (flat tongue and a V-Type tongue plate) in order to measure the noise under the two forms of value and volume of supply air fan, shaft power consumption, operating current, and static pressure. The results showed that the tongue plate and the V-plane tongue plate noise between the value of the measurement location of 6.7 in the tongue plate in the plane below the noise level is about V-tongue plate 1 ~ 1.5dB (A). Air flow rate testing showed that the flat plate and the V-Type tongue plate between the tongue plate V-Type flow rate value, the measurement location of 3.4 in the tongue plate in the plane was more than the V-Type flow rate tongue plate 5 to 5.5%. Shaft power testing of measurement model 3, and measurement model 4, showed that the tongue plate in the plane V-tongue plate was more than 8%, 5%. The measurement models 3 and 4 and 5 showed more than the V-Type plane tongue plate 1%, 2.7%, and 2.6%. The measurement models 6 and 8 showed that, the flat tongue plate is less than the V-tongue plate of 2.9% and 2.3%. Static pressure testing showed that the flat tongue plate in particular measurement models (3,4,8,9), the static value of V-tongue plate than the 11.1% higher, respectively, 9%, 4.3%, and 3.7%. The results summarized above suggest that, in the specific measurement points, when parallel to the tongue plate the V-tongue board has better performance.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ching-Song Jwo, Ching-Song Jwo, Tseng-Tang Cheng, Tseng-Tang Cheng, Hung-Pin Cho, Hung-Pin Cho, Wei-Tang Chiang, Wei-Tang Chiang, Sih-Li Chen, Sih-Li Chen, Chien-Wei Chen, Chien-Wei Chen, Ling-You Jian, Ling-You Jian, } "Measurement and research on the appearance of tongue board based on modification to discuss centrifugal fan air performance", Proc. SPIE 8321, Seventh International Symposium on Precision Engineering Measurements and Instrumentation, 83213L (15 November 2011); doi: 10.1117/12.905338; https://doi.org/10.1117/12.905338
PROCEEDINGS
10 PAGES


SHARE
Back to Top