15 November 2011 Experimental investigation on the single-wavelength Brillouin fiber ring laser
Author Affiliations +
Proceedings Volume 8335, 2012 International Workshop on Image Processing and Optical Engineering; 83351B (2011) https://doi.org/10.1117/12.917570
Event: 2012 International Workshop on Image Processing and Optical Engineering, 2012, Harbin, China
Abstract
A single-wavelength Brillouin fiber ring laser is presented and its characteristics are investigated experimentally. The pump wavelength is 1551.8nm, and the length of the fiber in the ring cavity is about 13km. The influence of the pump and the output coupler on the laser output spectrum is discussed. The results show that high output coupling ratio leads to high power of output laser. When the power of the pump is over -12.8dBm, an obvious stimulated Brillouin scattering peak is acquired. The laser has low threshold, and is proved to be stable with power fluctuations of less than 0.7dB over more than 1h.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Huaping Gong, Huaping Gong, Yumeng Tu, Yumeng Tu, Yongxing Jin, Yongxing Jin, Jianfeng Wang, Jianfeng Wang, Xinyong Dong, Xinyong Dong, } "Experimental investigation on the single-wavelength Brillouin fiber ring laser", Proc. SPIE 8335, 2012 International Workshop on Image Processing and Optical Engineering, 83351B (15 November 2011); doi: 10.1117/12.917570; https://doi.org/10.1117/12.917570
PROCEEDINGS
8 PAGES


SHARE
Back to Top