Paper
28 March 2012 Overcoming hysteresis in multilayered piezoceramic actuators used in adaptive optics
Emma Bryce, Erman Uzgur, David Hutson, Katherine Kirk, Mel Strachan, Noah Schwartz, Phil Parr-Burman
Author Affiliations +
Abstract
Piezoceramic actuators are of increasing interest within the field of adaptive optics through their ability for macro and nano positioning. However, a major drawback for their use is the inherent, non linear hysteresis that is present, which will reduce the accuracy in positioning. Typical (raw) hysteresis for multilayered piezoceramic actuators is 20% of full extension. Methods have been researched to overcome the hysteresis but they often involve complex additions to the actuators and its positioning system. This paper discusses two methods to overcome the hysteresis in a simpler approach. The first method is using capacitance measurements which correlate with the extension of the actuators and reduces hysteresis to 5%. The second method involves measuring the frequency at a specific impedance phase, which can reduce hysteresis to between 0 - 2%. Both methods provide reduction in hysteresis during extension sensing.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Emma Bryce, Erman Uzgur, David Hutson, Katherine Kirk, Mel Strachan, Noah Schwartz, and Phil Parr-Burman "Overcoming hysteresis in multilayered piezoceramic actuators used in adaptive optics", Proc. SPIE 8342, Behavior and Mechanics of Multifunctional Materials and Composites 2012, 83420O (28 March 2012); https://doi.org/10.1117/12.917561
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Capacitance

Multilayers

Adaptive optics

Astronomy

Mathematical modeling

Electrodes

Back to Top