Paper
28 March 2012 Fabrication of sub-micron unidirectional patterns on SMP substrates
Zhongbi Chen, Sridhar Krishnaswamy
Author Affiliations +
Abstract
In this paper, we demonstrate an assisted self-assembly fabrication method for unidirectional patterns using pre-programmed shape memory polymer (SMP) as the substrate in an organic/inorganic bi-layer structure. By heating the hybrid structure above the SMP's shape recovery temperature, the substrate expands because of positive CTE in one direction, while in the perpendicular direction it shrinks due to shape memory effect overpowering thermal expansion. Consequently, the metal thin film coated on the substrate is subjected to an orthogonal compression-tension stress field and forms unidirectional wavy patterns. The experimentally obtained wrinkles are well-aligned with uniform wavelength ranging from about 850 nm to 1.5 μm corresponding to various programming strains and film thicknesses. A parametric study was carried out to study the influence of programming strain and film thickness on wrinkle wavelength. It was found that both the decrease of programming strain and the increase of film thickness can result in a longer wavelength. The present study is expected to offer a convenient and simple path of fabricating unidirectional wavy patterns.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhongbi Chen and Sridhar Krishnaswamy "Fabrication of sub-micron unidirectional patterns on SMP substrates", Proc. SPIE 8342, Behavior and Mechanics of Multifunctional Materials and Composites 2012, 83420Z (28 March 2012); https://doi.org/10.1117/12.915053
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Computer programming

Aluminum

Thin films

Atomic force microscopy

Photomicroscopy

Shape memory polymers

Thermal effects

Back to Top