Translator Disclaimer
3 April 2012 Self-healing sandwich composite structures
Author Affiliations +
Abstract
Previous research demonstrated that a thin self-healing layer is effective in recovering partial sandwich composite performance after an impact event. Many studies have been conducted that show the possibility of using Fiber Bragg Grating (FBG) sensors to monitor the cure of a resin through strain and temperature monitoring. For this experiment, FBG sensors were used to monitor the curing process of a self-healing layer within a twelve-layer fiberglass laminate after impact. First, five self-healing sandwich composite specimens were manufactured. FBG sensors were embedded between the fiberglass and foam core. Then the fiberglass laminate was impacted with the use of a drop tower and the curing process was monitored. The collected data was used to compare the cure of the resin and fiberglass alone to the cure of the resin from a self-healing specimen. For the low viscosity resin system tested, these changes were not sufficiently large to identify different polymerization states in the resin as it cured. These results indicate that applying different resin systems might increase the efficiency of the self-healing in the sandwich composites.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D. Fugon, C. Chen, and K. Peters "Self-healing sandwich composite structures", Proc. SPIE 8345, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2012, 83451K (3 April 2012); https://doi.org/10.1117/12.915165
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
Back to Top