6 April 2012 Optimal sensor placement based on substructure sensitivity
Author Affiliations +
Abstract
Optimal sensor placement is key issues of structures health monitoring (SHM). In study of sensor placement, the main achievement focus on optimal criterions of sensor locations based on modal test, while optimal criterions of sensor locations based on damage identification, optimal method of sensor locations and optimal sensor number should be investigated further. In this study, a novel optimal sensor placement strategy based on sensitivity is proposed. Optimal sensor placement based on sensitivity analysis is an alternation method to consider damage identification. The basic idea of the proposed methodology is that influence range of different damage parameters is different. First, damage sensitivities in every element based on modal parameters are calculated. Then the elements that are sensitive to damage are selected. According to the detection of damage sensitivity in these elements, minimums number can be found by sensitivity. At last, the elements that are not selected are considered as not sensitive to modal parameters and would be placed the strain sensors. Numerical simulation of a three-dimensional truss structure is implemented to evaluate the minimum sensor number of different damage parameters according to the above methods. Moreover, damage location can be detected under singledamage situation and the element with most severe damage can be identified in multi-damage case using the proposed sensor placement.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shumei Zhou, Yuequan Bao, and Hui Li "Optimal sensor placement based on substructure sensitivity", Proc. SPIE 8345, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2012, 83453S (6 April 2012); doi: 10.1117/12.915074; https://doi.org/10.1117/12.915074
PROCEEDINGS
9 PAGES


SHARE
Advertisement
Advertisement
Back to Top