Monitoring the efficiency of plasticizer in fresh cement using ultrasound

D. G. Aggelis; D. Grammenou; T. E. Matikas

doi:10.1117/12.915023

30 March 2012 Monitoring the efficiency of plasticizer in fresh cement using ultrasound

D. G. Aggelis, D. Grammenou, T. E. Matikas

Author Affiliations +

Proceedings Volume 8346, Smart Sensor Phenomena, Technology, Networks, and Systems Integration 2012; 83460H (2012) https://doi.org/10.1117/12.915023
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2012, San Diego, California, United States

Abstract

The importance of evaluating the quality of cementitious materials at an age as early as possible is well known. High performance cementitious materials usually include chemical admixtures like accelerators, plasticizers or air entraining agents in order to tailor the properties of the material at the fresh or hardened state. Ultrasonic methods have been developed for monitoring the hydration process. Measuring the transit time and amplitude of the pulse at regular intervals, the elastic modulus development with time can be calculated and therefore, the contribution of the admixtures can be evaluated. However, this requires monitoring for a period of at least a few hours, which although fast compared to the standard compressive test, still is not fast enough to allow decisions about accepting the material before placement in the construction forms based on the suitability of concrete. The general quality of concrete and specifically the contribution of the admixtures should be assessed immediately. In the present paper fresh cementitious material is examined by ultrasound. The excited frequency is varied in order to apply different wavelengths, which are influenced differently by the constituent materials. The effect of chemical plasticizer is examined through the release of air bubbles and the change in viscosity it imposes. Wave velocity vs. frequency curves for different mixes show that the existence of sand plays an important role due to interaction with different wave lengths. The possibility to characterize the effectiveness of chemical admixtures by a single dispersion and attenuation measurement just after mixing is discussed.

Citation Download Citation

D. G. Aggelis, D. Grammenou, and T. E. Matikas "Monitoring the efficiency of plasticizer in fresh cement using ultrasound", Proc. SPIE 8346, Smart Sensor Phenomena, Technology, Networks, and Systems Integration 2012, 83460H (30 March 2012); https://doi.org/10.1117/12.915023

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Cements

Signal attenuation

Scattering

Ultrasonography

Dispersion

Liquids

Velocity measurements

Show All Keywords

Keywords/Phrases

Search In:

Publication Years