4 April 2012 Image processing for the laser spot thermography of composite materials
Author Affiliations +
Abstract
This paper describes an image processing algorithm in support of infrared based nondestructive testing. The algorithm aims at analyzing the raw thermal infrared images obtained by using the nondestructive evaluation method of the laser spot thermography. In the study presented in this paper, a laser was used to scan a test specimen through the generation of single pulses. The temperature distribution produced by this thermoelastic source was measured by an infrared camera and processed with a two-stage algorithm. In the first stage few statistical parameters were used to flag the presence of damage. In the second stage the images that revealed the presence of damage were processed computing the first and second spatial derivative. Two spatial filters were also used to enhance contrast, and to locate and size the defect. The algorithm was experimentally validated by scanning the surface of a CFRP and a GFRP composite plate with induced defects.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ambra Vandone, Ambra Vandone, Piervincenzo Rizzo, Piervincenzo Rizzo, Marcello Vanali, Marcello Vanali, } "Image processing for the laser spot thermography of composite materials", Proc. SPIE 8347, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2012, 83471L (4 April 2012); doi: 10.1117/12.914713; https://doi.org/10.1117/12.914713
PROCEEDINGS
9 PAGES


SHARE
Back to Top