20 April 2012 PEDOT pillar fabrication using DOD inkjet system
Author Affiliations +
In this paper, we present our preliminary results of high aspect ratio 3D PEDOT pillar study by drop-on demand (DOD) direct printing system. Design of the experimental setup and the fabrication of the DOD PEDOT pillar are introduced. Currently, the system can achieve a PEDOT pillar with a height of 300 μm and 80 μm in diameter. The proposed PEDOT 3D printing process has a wide range of potential applications in the eletronics and display industry.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei Cui, Wei Cui, Cheng-Ling Chang, Cheng-Ling Chang, Wei-Chih Wang, Wei-Chih Wang, } "PEDOT pillar fabrication using DOD inkjet system", Proc. SPIE 8348, Health Monitoring of Structural and Biological Systems 2012, 834819 (20 April 2012); doi: 10.1117/12.915229; https://doi.org/10.1117/12.915229


3D printing of nano- and micro-structures
Proceedings of SPIE (July 15 2016)
Inkjet-printed multi-parameter measuring sensor
Proceedings of SPIE (April 17 2017)
A physical breast phantom for 2D and 3D x ray...
Proceedings of SPIE (March 09 2017)
Inkjet printed PEDOT:PSS for organic devices
Proceedings of SPIE (October 15 2012)
Primary preservation in ICC color management system
Proceedings of SPIE (December 28 2001)

Back to Top