31 May 2012 Lifetime prediction in vacuum packaged MEMS provided with integrated getter film
Author Affiliations +
Abstract
Thin-film getter integration is one of the key technologies enabling the development of a wide class of MEMS devices, such as IR microbolometers and inertial sensors, where stringent vacuum requirements must be satisfied to achieve the desired performances and preserve them for the entire lifetime. Despite its importance, the question about lifetime prediction is still very difficult to answer in a reliable way. Here we present an experimental approach to the evaluation of lifetime, based on an accelerated life test performed varying both the storage conditions and the getter area. A test vehicle based on a resonator device was used. The hermeticity was evaluated by means of specific leak testing, while MEMS behavior during the ageing test was studied monitoring device functional parameters and by residual gas analysis (RGA). Unexpected results were observed leading to the discovery that methane is pumped by the getter below 100°C. These results served as the inputs of a suitable model allowing extrapolating the device lifetime in operating? conditions, and pointed out that RGA is an essential tool to correctly interpret the aging tests.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fabrizio Siviero, Fabrizio Siviero, Antonio Bonucci, Antonio Bonucci, Andrea Conte, Andrea Conte, Marco Moraja, Marco Moraja, Olivier Gigan, Olivier Gigan, Isabelle Thomas, Isabelle Thomas, } "Lifetime prediction in vacuum packaged MEMS provided with integrated getter film", Proc. SPIE 8353, Infrared Technology and Applications XXXVIII, 83533C (31 May 2012); doi: 10.1117/12.920566; https://doi.org/10.1117/12.920566
PROCEEDINGS
8 PAGES


SHARE
Back to Top