Modeling GPR data from lidar soil surface profile

Brian Burns; William W. Clark; Ian McMichael

doi:10.1117/12.922806

10 May 2012 Modeling GPR data from lidar soil surface profile

Brian Burns, William W. Clark, Ian McMichael

Proceedings Volume 8357, Detection and Sensing of Mines, Explosive Objects, and Obscured Targets XVII; 835712 (2012) https://doi.org/10.1117/12.922806
Event: SPIE Defense, Security, and Sensing, 2012, Baltimore, Maryland, United States

Abstract

Ground Penetrating Radar (GPR) has been applied for several years to the problem of detecting both anti-personnel and anti-tank landmines. One major challenge for reliable mine detection using GPR is removing the response from the ground. When the ground is flat this is a straightforward process. For the NIITEK GPR, the flat ground will show up as one of the largest responses and will be consistent across all the channels, making the surface simple to detect and remove. Typically, the largest responses from each channel, assumed to be the surface, are aligned in range and then zeroed out. When the ground is not flat, the response from the ground becomes more complicated making it no longer possible to just assume the largest response is from the ground. Also, certain soil surface features can create responses that look very similar to those of mines. To further complicate the ground removal process, the motion of the GPR antenna is not measured, making it impossible to determine if the ground or antenna is moving from just the GPR data. To address surface clutter issues arising from uneven ground, NVESD investigated profiling the soil surface with a LIDAR. The motion of both the LIDAR and GPR was tracked so the relative locations could be determined. Using the LIDAR soil surface profile, GPR data was modeled using a simplified version of the Physical Optics model. This modeled data could then be subtracted from the measured GPR data, leaving the response without the soil surface. In this paper we present a description and results from an experiment conducted with a NIITEK GPR and LIDAR over surface features and buried landmines. A description of the model used to generate the GPR response from the soil and the algorithm that was used to subtract the two provided. Mine detection performances using both GPR only and GPR with LIDAR algorithms are compared.

Citation Download Citation

Brian Burns, William W. Clark, and Ian McMichael "Modeling GPR data from lidar soil surface profile", Proc. SPIE 8357, Detection and Sensing of Mines, Explosive Objects, and Obscured Targets XVII, 835712 (10 May 2012); https://doi.org/10.1117/12.922806

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available