Tracking nonuniformity in the thermal infrared sensor through pre-launch measurements and simulated on-orbit data

Matthew Montanaro; Aaron D. Gerace

doi:10.1117/12.919420

24 May 2012 Tracking nonuniformity in the thermal infrared sensor through pre-launch measurements and simulated on-orbit data

Matthew Montanaro, Aaron D. Gerace

Author Affiliations +

Proceedings Volume 8390, Algorithms and Technologies for Multispectral, Hyperspectral, and Ultraspectral Imagery XVIII; 83902C (2012) https://doi.org/10.1117/12.919420
Event: SPIE Defense, Security, and Sensing, 2012, Baltimore, Maryland, United States

Abstract

The Thermal Infrared Sensor (TIRS) will continue thermal band measurements of the Earth for the Landsat Data Continuity Mission (LDCM). The instrument is a dual-channel, push-broom imager that consists of 1850 detector elements per band spanning the 15-degree cross track field of view. The push-broom configuration of the instrument presents several challenges to ensure that the instrument meets uniformity and linearity requirements across the field of view. Each detector element may have a slightly different spectral and radiometric response resulting from variations in pixel-to-pixel gain, bias, and spectral band shape. These differences must be measured and corrected for in order to provide a radiometrically accurate data product necessary for the Landsat science mission. During pre-launch testing, calibration ground support equipment (CGSE) is used to uniformly illuminate the TIRS field of view with various source radiances. Calibration routines are created to convert the raw detector signal from these uniform sources into accurate at-sensor radiances. During the on-orbit life of the instrument, vicarious calibration techniques such as the side-slither method may be used to check the pixel-to-pixel uniformity. To demonstrate the value of this technique for TIRS, the Digital Imaging and Remote Sensing Image Generation (DIRSIG) tool is utilized to simulate on-orbit TIRS data. Appropriate sites on the Earth are identified and side-slither data is generated. The simulated on-orbit data is then compared to pre-launch calibration data to determine whether this calibration approach is viable to track the calibration of TIRS over its orbital lifetime.

Citation Download Citation

Matthew Montanaro and Aaron D. Gerace "Tracking nonuniformity in the thermal infrared sensor through pre-launch measurements and simulated on-orbit data", Proc. SPIE 8390, Algorithms and Technologies for Multispectral, Hyperspectral, and Ultraspectral Imagery XVIII, 83902C (24 May 2012); https://doi.org/10.1117/12.919420

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available