Paper
16 October 2012 Study on the applications of high-precision optical wedge machining, assembling, and adjustment technologies
Ying Su, Rui Guo, Jian-tao Shi, Yun-long Zhang, Feng Zhang, Xuan-min Liu, Hong-jun Zhao
Author Affiliations +
Proceedings Volume 8416, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 84160W (2012) https://doi.org/10.1117/12.973724
Event: 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2012), 2012, Xiamen, China
Abstract
Optical wedge is the common optics in optical system and has been widely applied in the photo-electrical collimators. This paper systematically analyses and sums the fabrication method of controlling wedge angle accuracy, exact measurement of wedge angle, distinction between basic and inclined phanes and their markings, angle control and cylindrical disalignment of double-glued wedge as well as its proper assembly and testing. From the viewpoint of wedge design, manufacture, glue, assembly and testing, some attentions and solutions were proposed to assure high quality, high machining efficiency and assembly reliability so as to provide excellent performance in photo-electrical stabilized sight systems.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ying Su, Rui Guo, Jian-tao Shi, Yun-long Zhang, Feng Zhang, Xuan-min Liu, and Hong-jun Zhao "Study on the applications of high-precision optical wedge machining, assembling, and adjustment technologies", Proc. SPIE 8416, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 84160W (16 October 2012); https://doi.org/10.1117/12.973724
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fabrication

Mirrors

Optics manufacturing

Optical testing

Beryllium

Surface finishing

Polishing

RELATED CONTENT

First steps in ELT optics polishing
Proceedings of SPIE (August 07 2018)
Rapid optical fabrication with CCOS
Proceedings of SPIE (November 01 1990)
Fabrication and testing of large flats
Proceedings of SPIE (September 14 2007)
Fabrication Of The Keck Ten Meter Telescope Primary Mirror
Proceedings of SPIE (October 22 1985)

Back to Top