16 October 2012 Mathematical model for active lap to achieve unsymmetrical fabrication
Author Affiliations +
Proceedings Volume 8416, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 841622 (2012) https://doi.org/10.1117/12.975689
Event: 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2012), 2012, Xiamen, China
Abstract
A new mathematical model is proposed to calculate the Material Removal (MR) on any point of the mirror’s surface during Computer Controlled Active Lap (CCAL)’s grinding and polishing. In this model, the workpiece rotation rate ω1, lap rotation rate ω2 and the pressure P which applied on the workpiece surface by active lap are binary functions in the mirror polar coordinate system whose polar axis is from workpiece center to lap center’s initial position. The independent variables ρ and θ are the coordinates of lap center during fabrication, so the rotation rate and pressure is become to ω1(ρ, θ), ω2(ρ, θ) and P(ρ, θ). According to the simulation, this model can produce unsymmetrical material removal by choosing unsymmetrical ω1(ρ, θ), ω2(ρ, θ) or P(ρ, θ). This means it is possible to get the optimal ω1, ω2 and P functions for the demanded material removal map, and make the effects of single circle manufacture much better. This model can give active lap the unsymmetrical fabrication capability, and suitable for correcting the astigmatism or grinding off-axis aspheric surface.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Haitao Liu, Haitao Liu, Zhige Zeng, Zhige Zeng, Fan Wu, Fan Wu, Bin Fan, Bin Fan, } "Mathematical model for active lap to achieve unsymmetrical fabrication", Proc. SPIE 8416, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 841622 (16 October 2012); doi: 10.1117/12.975689; https://doi.org/10.1117/12.975689
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Machining of paraboloidal mirrors
Proceedings of SPIE (May 13 2007)
Recent progress on asphere manufacturing and testing at CIOM
Proceedings of SPIE (October 05 2000)
Optics for the 20/20 telescope
Proceedings of SPIE (January 29 2003)
Manufacture of 8.4 m off axis segments a 1...
Proceedings of SPIE (September 23 2004)

Back to Top