Translator Disclaimer
16 October 2012 Experimental study of grinding removal efficiency in optical processing for using NC manipulator
Author Affiliations +
Proceedings Volume 8416, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 841626 (2012) https://doi.org/10.1117/12.977368
Event: 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2012), 2012, Xiamen, China
Abstract
The manipulator is a simple numerical simulation of artificial which was used in manufacturing the mirror. It can be control by the computer to adjust the lap rev and speed, to achieve quantitative removal. In the processing of large-diameter primary mirror, we used a combination according to the actual situation of the processing method. Usually two or even more manipulators were used. The method is more efficiency than the traditional CCOS processing. In this paper, the various factors which affecting the removal efficiency of manipulator were experimented. After analyzing the experiment data, the best match parameter can be found. Use this best parameter in actual processing of large-diameter mirror, the efficiency was improved a lot.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei Zhang, Zhige Zeng, Fan Wu, and Bin Zhuo "Experimental study of grinding removal efficiency in optical processing for using NC manipulator", Proc. SPIE 8416, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 841626 (16 October 2012); https://doi.org/10.1117/12.977368
PROCEEDINGS
8 PAGES


SHARE
Advertisement
Advertisement
Back to Top