16 October 2012 Comparative analysis of three-position measurement technology and multi-positions average measurement technology
Author Affiliations +
Proceedings Volume 8416, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 84162C (2012) https://doi.org/10.1117/12.976809
Event: 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2012), 2012, Xiamen, China
Abstract
Absolute measurement technique can separate the system error from the test results, so it's widely applied in the field of high-precision surface testing. For the testing process of three-position measurement technology is simple; it's often used for the measurement of spherical components. But three-position measurement technology is sensitive to the adjustment error. Therefore the multi-location average technology was proposed, which can reduce the influence of the adjustment error. A spherical component which diameter is 80mm and F number is 1.1 was used to test by the two technologies. Test results showed that: multi-positions average measurement technology can effectively reduce the influence of the adjustment error.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peng Yang, Fan Wu, Xi Hou, "Comparative analysis of three-position measurement technology and multi-positions average measurement technology", Proc. SPIE 8416, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 84162C (16 October 2012); doi: 10.1117/12.976809; https://doi.org/10.1117/12.976809
PROCEEDINGS
4 PAGES


SHARE
Back to Top