15 October 2012 Laser alignment measurement model with double beam
Author Affiliations +
Proceedings Volume 8417, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment; 84170Y (2012) https://doi.org/10.1117/12.979883
Event: 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2012), 2012, Xiamen, China
Abstract
Double LD-Double PSD schedule.employ a symmetric structure and there are a laser and a PSD receiver on each axis. The Double LD-Double PSD is used, and the rectangular coordinate system is set up by use of the relationship of arbitrary two points coordinates, and then the parameter formula is deduced by the knowledge of solid geometry. Using the data acquisition system and the data processing model of laser alignment meter with double laser beam and two detector , basing on the installation parameter of the computer, we can have the state parameter between the two shafts by more complicated calculation and correction. The correcting data of the four under chassis of the adjusted apparatus moving on the level and the vertical plane can be calculated using the computer. This will instruct us to move the apparatus to align the shafts.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Changtao Mo, Lili Zhang, Xianglin Hou, Ming Wang, Jia Lv, Xin Du, Ping He, "Laser alignment measurement model with double beam", Proc. SPIE 8417, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 84170Y (15 October 2012); doi: 10.1117/12.979883; https://doi.org/10.1117/12.979883
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Laser shaft alignment measurement model
Proceedings of SPIE (November 27 2007)
Topographic migration of georadar data
Proceedings of SPIE (April 27 2000)
Intelligent pump test system based on virtual instrument
Proceedings of SPIE (September 02 2003)
A contact-type tensionmeter for hot rolling mills
Proceedings of SPIE (December 31 2008)

Back to Top