15 October 2012 Design and precision measurement of TDICCD focal plane for space camera
Author Affiliations +
With the rapid development of relative technologies the cameras for remote sensing are also developing in the direction of wide spectral band and large field of view Because of the limited pixels, the existing TDI CCDs can't meet the requirement of large field of view. So, it is necessary to connect two or more TDI CCDs together by using a stitching method. In this paper, the principle, technique request and method of mechanical interleaving assembly are investigated, then the focal plane assembly structure is designed, the space positions of the pixels were obtained by monitoring directly the pixels of TDI CCD using microscopic system carried on an air rails with linearity in less than 2 μm/m. Then, the assembly precision of 4 TDI CCD assembled focal plane was measured after dynamic and thermal test, the result shows that the error is less than 4 μm. The result proves that this method is precise, feasible and can achieve the high precision measurement of long focal plane.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xuezhi Jia, Guang Jin, "Design and precision measurement of TDICCD focal plane for space camera", Proc. SPIE 8419, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optoelectronic Materials and Devices for Sensing, Imaging, and Solar Energy, 84190X (15 October 2012); doi: 10.1117/12.977206; https://doi.org/10.1117/12.977206


A high resolution hand-held focused beam profiler
Proceedings of SPIE (May 16 2017)
High speed CCD image processing at 75 MSPS and 10...
Proceedings of SPIE (October 11 1993)
Multisensor system self-calibration
Proceedings of SPIE (September 13 1995)

Back to Top