Translator Disclaimer
7 November 2012 Validation of an induction motor thermal model by using fiber Bragg grating temperature sensors
Author Affiliations +
Proceedings Volume 8421, OFS2012 22nd International Conference on Optical Fiber Sensors; 8421B3 (2012) https://doi.org/10.1117/12.974329
Event: OFS2012 22nd International Conference on Optical Fiber Sensor, 2012, Beijing, China
Abstract
A thermal model of a three-phase induction motor is validated by using fiber Bragg grating (FBG) temperature sensors. In the experimental setup, temperature, electrical and mechanical measurements were simultaneously obtained. Eight multiplexed FBG temperature sensors in a quasi-distributed configuration were used. Results from the simulation of the model presented a maximum difference of 0.75oC between the experimental values measured during the transient response of the motor and the simulated ones, while the steady state response converged to the measured experimental values. The instrumentation setup allowed the inclusion of the mechanical losses in the proposed thermal model, and this is the main contribution provided by this work.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kleiton de Morais Sousa, Hypolito José Kalinowski, and Jean Carlos Cardozo da Silva "Validation of an induction motor thermal model by using fiber Bragg grating temperature sensors", Proc. SPIE 8421, OFS2012 22nd International Conference on Optical Fiber Sensors, 8421B3 (7 November 2012); https://doi.org/10.1117/12.974329
PROCEEDINGS
4 PAGES


SHARE
Advertisement
Advertisement
Back to Top