Paper
25 April 2012 Tailoring the absorption in a photonic crystal membrane: a modal approach
Author Affiliations +
Abstract
In order to achieve high efficiency photovoltaic devices and sensors, we propose to implement photonic crystals on thin absorbing layers in such a way to generate two Bloch mode resonances with opposite symmetries. Through FDTD and RCWA simulations, we track and adjust the characteristics of these modes so as to reach their degeneracy. Design and simulations were carried out considering a hydrogenated amorphous silicon layer. We demonstrate that up to 92% absorption can be achieved, far above the 50% limit corresponding to the critical coupling condition between an incident wave and an optical resonance. Moreover, the robustness of the absorption peak was tested by varying both the topographical parameters of the PhC membrane and the angle of incidence. Finally, some guidelines are provided to generalize our approach for the design of broadband absorbers.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Romain Peretti, Guillaume Gomard, Christian Seassal, Xavier Letartre, and Emmanuel Drouard "Tailoring the absorption in a photonic crystal membrane: a modal approach", Proc. SPIE 8425, Photonic Crystal Materials and Devices X, 84250Q (25 April 2012); https://doi.org/10.1117/12.922427
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Photonic crystals

Solar cells

Amorphous silicon

Finite-difference time-domain method

Photovoltaics

Sensors

Back to Top