9 May 2012 Nonlinear characteristics of laser-induced incandescence of rough carbon surfaces
Author Affiliations +
Proceedings Volume 8434, Nonlinear Optics and Applications VI; 84341H (2012); doi: 10.1117/12.921999
Event: SPIE Photonics Europe, 2012, Brussels, Belgium
Abstract
In this work the possibility of laser overheating of light-absorbing surfaces of bulk carbon samples to incandescent temperatures with the use of a moderate-power Q-switched YAG-Nd3+ laser (wavelength 1064 nm, pulse duration 20 ns, power density 3-10 MW/cm2) was studied. We observed laser-induced incandescence (LII) of carbon surfaces and investigated its properties. When the surface was irradiated by a sequence of laser pulses, unusual changes of LII intensity were discovered in the experiments. Also significant nonlinearity in the dependence of LII intensity on the laser pulse power density was observed. The average temperature of irradiated surface was estimated by approximating the experimental LII spectrum by Plank's function and by computer simulations of laser heating of the carbon surface. For typical experimental conditions, the value of 2400 K was obtained. Both of the estimates of temperature are in a good agreement. The model, which is proposed to explain the observed effects, is based on the equation of heat conduction. Well-known thermal and optical properties of carbon are taken into account. The observed effects can be explained by essential nonuniformity of heating of rough surfaces and dominant evaporation of carbon from the tops of surface asperities.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sergei E. Zelensky, Leonid V. Poperenko, Alexandr V. Kopyshinsky, Katerina S. Zelenska, "Nonlinear characteristics of laser-induced incandescence of rough carbon surfaces", Proc. SPIE 8434, Nonlinear Optics and Applications VI, 84341H (9 May 2012); doi: 10.1117/12.921999; https://doi.org/10.1117/12.921999
PROCEEDINGS
6 PAGES


SHARE
KEYWORDS
Carbon

Pulsed laser operation

Computer simulations

Optical properties

Q switched lasers

Laser irradiation

Polymers

Back to Top