1 May 2012 MTF measurements on real time for performance analysis of electro-optical systems
Author Affiliations +
Abstract
The need of methods and tools that assist in determining the performance of optical systems is actually increasing. One of the most used methods to perform analysis of optical systems is to measure the Modulation Transfer Function (MTF). The MTF represents a direct and quantitative verification of the image quality. This paper presents the implementation of the software, in order to calculate the MTF of electro-optical systems. The software was used for calculating the MTF of Digital Fundus Camera, Thermal Imager and Ophthalmologic Surgery Microscope. The MTF information aids the analysis of alignment and measurement of optical quality, and also defines the limit resolution of optical systems. The results obtained with the Fundus Camera and Thermal Imager was compared with the theoretical values. For the Microscope, the results were compared with MTF measured of Microscope Zeiss model, which is the quality standard of ophthalmological microscope.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jose Augusto Stuchi, Jose Augusto Stuchi, Elisa Signoreto Barbarini, Elisa Signoreto Barbarini, Flavio Pascoal Vieira, Flavio Pascoal Vieira, Daniel dos Santos, Daniel dos Santos, Mário Antonio Stefani, Mário Antonio Stefani, Fatima Maria Mitsue Yasuoka, Fatima Maria Mitsue Yasuoka, Jarbas C. Castro Neto, Jarbas C. Castro Neto, Evandro Luis Linhari Rodrigues, Evandro Luis Linhari Rodrigues, } "MTF measurements on real time for performance analysis of electro-optical systems", Proc. SPIE 8437, Real-Time Image and Video Processing 2012, 84370H (1 May 2012); doi: 10.1117/12.915632; https://doi.org/10.1117/12.915632
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

An ISO standard for measuring low light performance
Proceedings of SPIE (February 26 2015)
MTF measurement for testing microscopic objective
Proceedings of SPIE (December 31 1991)
Advancements in E-O framing
Proceedings of SPIE (November 04 1998)
Automatic Off-Axis OTF Testing
Proceedings of SPIE (November 16 1986)
Optical analysis of electro-optical systems by MTF calculus
Proceedings of SPIE (November 02 2011)

Back to Top